manualshive.com logo in svg

ALGE-Timing TdC 8000, Manual, Page: 30 / 108

Share
Download
ALGE-Timing TdC 8000 Manual Download Page 30

TdC 8000 for Equestrian 

               

Page 30

Version:E-00-08-08

Page 30

4.4.

CLASS - Classement

The software for the classement is only partly finished. During the next month we will finish this part
of the software.

At the moment you can print the following lists:

·

Did not Finish

·

Disqualified

·

Protocol

Print a Classement:

·

Press the key <class>

Classement:              did not finish< F1

                           disqualified  F2

                               protocol  F3

Continue: ENTER

·

Select with the arrow keys the classement that you want to print

·

Press <ENTER>

Did not Finish:
It prints a list of all competitors that have a start time, but did not finish.

Disqualified:

It prints a list of all competitors that are disqualified.

Protocol:
You can print the following protocols:
·

Start Time

·

Finish Time

·

Run Time

·

Run Time Total

·

Count Down Time

·

Time Out Time

When select the protocol in the classement you can select with the cursor keys also the protocol
and press <ENTER>.

Summary of Contents for TdC 8000













































































































Reviews:

No comments