ALGE-Timing TdC 8000 Manual Download Page 28

Page: 28 / 108

TdC 8000 for Equestrian

Page 28

Version:E-00-08-08

Page 28

The info-display (6) shows the valid finish time of the start number shown in the finish display (2):

Input: 0015 C1 10:01:35.139 NEW No F1

e.g. start number 15

DISQU. F2

You can change the start number with the cursor keys (¢ and £) or input the start number with
the finish keyboard (15).

Confirm the start number with <ENTER>

If you have already different times for this start number it show the following::

Input: 0015 C1 10:01:35.139 NEW No F1

valid finish time

c0015 C1 10:01:28.143 DISQU. F2

c0015 C1 10:01:28.163

You can over write the valid run time with the numbers of the finish keyboard (15) (manual input
of
the run time).

If you want to copy the selected time to another start number press <F1> and assign it.

To disqualify the competitor press <F2>. The disqualified time is marked with a d. For a disqualifi
cation it clears the start time, finish time, and run time.

Exit by pressing <MENU> and <INPUT> of the finish keyboard (15) together.

Attention:

If it shows 00:00:00.000 as run time, it means that you have no run time for this
start
number.

If you make another run time valid, it stores the old run time with a c (clear).
e.g.: c 0009 C1 00:01:35.486

4.3.2.4.2. Editing a Run Time

You can edit the following:
-

over write a run time with keyboard (15)

you can copy the run time to another start number.

disqualification of a competitor (start number)

Changing a memory time:

Press <MENU> and <INPUT> together

Press <F2>

Press <ENTER>

The info-display (6) shows the valid run time of the start number shown in the finish display (8):

Input: 0015 RT 0000055.139 NEW No F1

e.g. start number 15

DISQU. F2

You can change the start number with the cursor keys (¢ and £) or input the start number with

the finish keyboard (15).
-

Confirm the start number with <ENTER>

The cursor is now on the first digit of the time:

Summary of Contents for TdC 8000













































































































Search results

Summary of Contents for TdC 8000

Reviews:

ALGE-Timing TdC 8000, Manual, Page: 28 / 108

Search results

Summary of Contents for TdC 8000

Reviews: