ALGE-Timing TdC 8000 Manual Download Page 10

Page: 10 / 108

TdC 8000 for Equestrian

Page 10

Version:E-00-08-08

Page 10

2.2.

Printer

When you switch TdC 8000 on it activates the printer automatically. After you selected the program
you can make the following adjustments for the printer:

Print-Mode:

The printer prints all data. The printer is automatically in this mode, when you s
witch the TdC 8000 on.

Buffer-Mode:

All data for the printer are stored in the buffer. This mode you use e.g. to change
the paper.

Printer is in Print-Mode

Press <PRINT>

Printer is now in the Buffer-Mode

Press <PRINT>

Printer is again in the printing mode. It prints now all data collected during
the buffer mode.

Printer Off:

The printer is off and all data for the printer are lost.

Printer is in Print-Mode

Press <ALT> and <PRINT> at the same time

Printer is switched off

Press <ALT> and <PRINT> at the same time

Printer is in Print-Mod

Paper Check

Push cover release button (11).

Remove the cover.

Check the paper.

A black strip will become visible on the edge of paper, when the paper
roll is about to run out.

Changing the Paper:

Push cover release button (11) .

Remove the cover.

Remove the rest of the paper from the holder.

Press the black lever forward and pull the paper out.

Put the axle into the paper holder.

Put the now roll on the paper holder.

Summary of Contents for TdC 8000













































































































Search results

Summary of Contents for TdC 8000

Reviews:

ALGE-Timing TdC 8000, Manual, Page: 10 / 108

Search results

Summary of Contents for TdC 8000

Reviews: