ALGE-Timing OPTIc3, Manual

Page: 105 / 121

Manual
Photo Finish OPTIc3
- 105-
Adjust the correct system at <Timing Port>:
•
channel for recording
o
STA or BOX for Chrone-
lec/Tag Heuer
o
C1 for others
•
Click on the arrow left of <Tim-
ing>.
•
Click on <Device> (it is four
lines below <Timing>).
•
On the right, click to open a
drop-down menu.
•
Select from the list the device
you use to read data (e.g. tran-
sponder system).
•
Adjust <Layer> as follows
o
serial for Chronelec (19200 Baud, LineEnds 13)
o
TcpClient for others
20.1.1 Race Result
Device: RaceResult_RaceResultSytem
TCP Client: IP address from Leser + Port 3601
Line End Delimiter: 13+10
+restart program