ALGE-Timing OPTIc3, Manual

Page: 103 / 121

Manual
Photo Finish OPTIc3
- 103-
19.1 Settings to control a video screen
•
ClockLayout active layout for clock
Standard: Clock.axml
•
Enabled to activate the screen control
Standard: FalseIf you use a video screen adjust here True!
•
LiveLayout active layout for running time (sprint races)
Standard: OPTI\Live.axml
•
LiveLongDistanceLayout active layout for running time (long distance races)
Standard: LiveLong.axml
•
LongDistanceSwitchLiveLayoutMeters switching distance for long distance layout
•
Ports per Screen-Server Computer you need one port
o
Broadcast Client no function
o
Briadcast Sever no function
o
Describtion simple describtion, free text
o
Enabled set here on true
o
Encoding set to UTF8
o
Layer set to Tcp Client
o
Line Beginnings set to Int32[] Array
o
Line Ends set to Int32[] Array
o
Serial no function
o
Serialization set to Binary
o
TCP Client shows the adjusted IP-address and the port

Keep-Alive Failure Interval 2000

Keep-Alive Interval 5000

Remote Host IP-address from screen server computer

Remote Port 6610
o
TCP Server no function
o
UDP Server no function
•
UDP Sender no function
•
ResultlistLayout active layout for results
Standard: OPTI\Resultlist4-Int.xaml
•
ShowLiveLayoutOnStart automatic layout change after a start impulse
True or False
•
ShowPreviousResultlistOnEmptyRecordingHeat False
•
ShowResultlistOnSendResults automatic layout change when sending results
•
ShowStartlistOnHeatChange automatic layout change when loading a heat into
the start dialoge
SponsorPath path for the sponsor logos on the screen server computer
If you use more screen server computers you have to copy these
sponsors logos on any computer into the same path!
•
StarlistLayout active layout for start list
Standard: OPTI\Startlist4-Int.xaml
•
UdateResultlistWhenHeatChanges If you set her eon true the result list is live
actualized when you are still evaluating
•
WindTreshold no function
Standard: 2