ALGE-Timing D-LINE 6 Series, Manual, Page: 14 / 16

Soccer Score Board
- 14 -
7.6 CLR button
When you want to have a blank display board, press the “CLR” button.
In this program you can make further adjustments which you can find described in point 2.1.
7.7 More adjustments
7.7.1 TIME
Here you can adjust if the time should count up or down. Also, you can enter a new day time.
If the time counts down, the following can be adjusted:
7.7.2 ONLY MINUTES
Adjustment possibilities are YES or NO. Yes means, when the time starts to count down
(e.g. 5 min.) the change of the minute occurrs when the Timy display shows 3min 59sec.
The Timy will give a beep when the countdown is finished.
7.7.3 TIME OUT
Adjustment possibility to make a time out or not
7.7.4 TEST
Possibility to start a second automatic display board test.

Power on test

Day time test

Day time off
Power on test means, each time when you switch on the Timy and you go into the Football
program, the Timy will start the display board test which is explained in point 2.7.2.
Day time test means, the test starts on a specific day time.
To deactivate the tests, go to “Day time off” and confirm with “OK” button.