Page 1: ......
Page 2: ... STEP 1 Remove the existing left side table by lifting and slinding out from the support brackets STEP 2 Remove the existing brackets by loosening and removing the four 10 32 flat head screws STEP 3 Install the new support bracket with four 10 32 pan head screws provided Tighten screws securely with a standard Philips screw driver ...
Page 3: ...he small 12 long lock bracket on the right side of the unit support bracket This will prevent the AXEFW from lifting out and will permanently lock it in place Use two 10 32 screws provided STEP 6 Install the left side finish cover panel to the AXEFW unit The panel is installed under the top perimeter of the AXEFW unit The finish panel is supported with an additional 12 long lock bar Use two 10 32 ...
Page 4: ... rear cover plate with an additional two 10 32 screws from the underside of the unit STEP 8 Install the chaffing tray steam water pan and food pans STEP 9 The unit is ready for use Use the cover when not in use to avoid dirt and debris in the unit The AXEFW cover can also be used as a side tray when the unit is not in use ...
