ALF-25X-4KCAM
14
3.Remote Control
Remote control instructions: remote control is divided into two types: infrared remote control and wireless remote control.
Please read the following contents according to the actual remote-control type.
3.1 Code Matching for Wireless Remote Control
One to One Code Matching:
Press the "set" button and "[CAMERA NUMBER]" keys combined for 3 seconds, LED indicator
starts flashing. When the camera receives the signal the power on LED indicator will go off if
the code matching was successful. The camera can then be controlled by this remote control after
one to one code pairing. Otherwise please clear the code matching of this remote control or
use another remote control to pair with the camera again. If one to one code matching failed, the
red LED light flashes for 20 seconds and then goes off, the camera will stop code match and turn
on sleep mode; Press any key to wake up the camera and restart code matching procedure.
Note: After code matching is successful, please select the camera address to control it.
Clearing Code:
Press the "set" button and "[CAMERA NUMBER]" keys combined for 3 seconds, the LED indicator
starts flashing. The camera will power off and on, the LED indicator will go off if code clearing successfully.
Sleep Mode and Wake Up:
Press any key to wake up the camera from sleep mode.
