ALFATRON ALF-5X/12X-4KCAM
- 14
3. Remote Control
Remote control instructions: remote control is divided into two types: infrared remote control and wireless
remote control. Please read the following contents according to the actual remote-control type.
3.1 Code Matching for Wireless Remote Control
One to One Code Matching:
Press the "set" button and "[CAMERA NUMBER]" keys combined for 3 seconds,
LED indicator starts flashing. When the camera receives the signal the power on
LED indicator will go off if the code matching was successful. The camera can then
be controlled by this remote control after one to one code pairing. Otherwise please
clear the code matching of this remote control or use another remote control to pair
with the camera again.
If one to one code matching failed, the red LED light flashes for 20 seconds and then
goes off, the camera will stop code match and turn on sleep mode; Press any key to
wake up the camera and restart code matching procedure.
Note: After code matching is successful, please select the camera address to control
it.
Clearing Code:
Press the "set" button and "[CAMERA NUMBER]" keys combined for 3 seconds, the
LED indicator starts flashing. The camera will power off and on, the LED indicator will
go off if code clearing successfully.
Sleep Mode and Wake Up:
Press any key to wake up the camera from sleep mode.
Accessory
Package
Power Supply, RS232 Control Cable, USB3.0 Cable, IR Remote Control, User
Manual
Optional
Accessories
Ceiling / Wall Mount (Extra Cost)
