34
GETTING TO KNOW YOUR INSTRUMENT PANEL
The system allows the driver to select
information by pushing the following buttons
mounted on the instrument panel to the left of
the steering column:
Instrument Cluster Display Control Buttons
Up Arrow Button
Push and release the up arrow
button to scroll upward through the
main menu and submenus or to
increase the displayed value.
Outside of the menu, the up arrow will adjust
the brightness of the instrument panel.
Down Arrow Button
Push and release the down arrow
button to scroll downward through
the main menu and submenus or
to decrease the displayed value.
Outside of the menu, the down arrow will
adjust the brightness of the instrument
panel.
SET/BACK Arrow Button
Push and release the SET/BACK arrow
button to access/select the information
screens or submenu screens of a main menu
item. Push and hold the SET/BACK arrow
button to return to the main menu from an
info screen or submenu item.
C
HANGE
E
NGINE
O
IL
I
NDICATOR
S
YSTEM
Your vehicle is equipped with an
engine oil change indicator system.
The “Change Engine Oil” message will flash in
the instrument cluster display for approximately
10 seconds and the oil pressure warning light
will illuminate. The “Change Engine Oil”
message in the instrument cluster display and
the oil pressure warning light will turn off after
approximately 10 seconds.
Reset the Oil Change Reminder message as
follows:
1. Without pushing the brake pedal, cycle the
ignition to the MAR/ON/RUN position (do
not start the engine).
2. Push and hold the accelerator pedal.
3. Push and release the brake pedal six times;
with a one second pause between each
push of the brake pedal.
4. After the 6th release of the brake pedal,
pause one second and then release the
accelerator pedal.
NOTE:
Consult an authorized dealer if the oil change
indicator message does not reset.
I
NSTRUMENT
C
LUSTER
D
ISPLAY
P
ROGRAMMABLE
M
ENU
The menu comprises a series of functions
arranged in a cycle. Push the up and down
arrow buttons to access the different options
and settings.
The setup menu can be activated by pushing
the SET/BACK button. Single pushes on the up
or down arrow buttons will scroll through the
setup menu options. The menu includes the
following functions:
Menu
Speed Buzzer
Trip B Data
Set Time
Set Date
Autoclose
Units
Language
20_4C_OM_EN_USC_t.book Page 34
Summary of Contents for 4C Spider 2020
Page 162: ......