22
GETTING TO KNOW YOUR VEHICLE
Internal Air Recirculation Activation
Slide the Recirculation knob to the position.
It is advisable to turn the Internal Air
Recirculation on while the vehicle is at a
standstill, or in tunnels, to prevent the
introduction of polluted air.
Do not use the function for a long time,
particularly if there are two people inside the
vehicle, to prevent the windows from misting.
NOTE:
The internal air recirculation system makes it
possible to reach the required heating or venti
-
lation conditions more quickly. Do not use the
internal air recirculation function on rainy/cold
days to avoid the possibility of the windows
misting.
Climate Control
Proceed as follows:
1. Rotate the Temperature Control to the blue
section.
2. Turn the Blower Control to “1” (first fan
speed). For rapid cooling, turn Blower
Control to “4” (maximum fan speed).
3. Move the Recirculation Control to .
4. Turn the Mode Control to .
5. Push the A/C button.
Cooling Adjustment
Proceed as follows:
1. Move the Recirculation Control to .
2. Rotate the Temperature Control towards
the red section to increase the temperature.
3. Turn the Blower Control counterclockwise to
reduce the fan speed.
Door Mirror Demisting
Demist/Defrost Button
Push the button to activate this function.
Push the button again to deactivate the
function.
Activation is indicated by the icon illuminating in
the instrument cluster display.
System Maintenance
In Winter, the Climate Control system must be
turned on at least once a month for about
10 minutes. Have the system inspected at an
authorized dealer before the Summer.
NOTE:
The system uses R-1234yf refrigerant which
does not pollute the environment in the event of
accidental leakage. Under no circumstances
should you use R-134a fluid which, in addition
to being incompatible with the system’s compo
-
nents, contributes greatly to the greenhouse
effect.
WINDOWS
P
OWER
W
INDOWS
NOTE:
The power windows operate when the igni
-
tion key is in the MAR (ON/RUN) position.
They will also operate for about three
minutes after the ignition key is placed in the
STOP (OFF/LOCK) position (or removed),
unless one of the doors is opened.
The buttons are located on the center
console.
20_4C_OM_EN_USC_t.book Page 22
Summary of Contents for 4C Spider 2020
Page 162: ......