Alfa Romeo 4C 2017 User Manual Download Page 41 | Manualshive

Page: 41 / 172

background image

T I LT / T E L E S C O P I N G S T E E R I N G C O L U M N

This feature allows you to tilt the steering column upward or downward. It also allows you to
lengthen or shorten the steering column. The tilt/telescoping control handle is located below the
steering wheel at the end of the steering column.

To unlock the steering column, push the lever downward (toward the floor). To tilt the steering
column, move the steering wheel upward or downward as desired. To lengthen or shorten the
steering column, pull the steering wheel outward or push it inward as desired. To lock the steering
column in position, push the lever upward until fully engaged.

WARNING!

Do not adjust the steering column while driving. Adjusting the steering column while driving or
driving with the steering column unlocked, could cause the driver to lose control of the vehicle.
Failure to follow this warning may result in serious injury or death.

Tilt/Telescoping Control Lever

G E T T I N G S T A R T E D

39

«
...
39
40
41
42
43
...
»

Summary of Contents for 4C 2017













































































































































































Reviews:

No comments

Related manuals for 4C 2017

Brand: Jabra Pages: 2

Brand: Jabra Pages: 38

Brand: Trailboss Pages: 5

Brand: CITROËN Pages: 301

Brand: FALCON RIDGE Pages: 8

Brand: Scosche Pages: 8

Brand: M7 SPEED Pages: 6

STO N SHO SNS 144

Brand: Big Mikes Performance Parts Pages: 7

Brand: Lincoln Pages: 10

Brand: Kargo Master Pages: 19

PRIME DESIGN VBR3-FT31B

Brand: Safe Fleet Pages: 12

Brand: RAM Pages: 148

Brand: Hamron Pages: 36

Brand: TomTom Pages: 22

Brand: TATA Motors Pages: 232

Brand: Blaupunkt Pages: 6

Outlander Plug-in hybrid

Brand: Mitsubishi Pages: 28

Brand: Curt Manufacturing Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands