20
• Daily Program - the day of the week is selected and the programmed time of turning on and off of the system. There are
three time ranges for each day.
• Weekly Program - Weekly turn-on / off times are programmed. There are three time ranges to be set:
• Week-End program – you can choose one of the two time periods - "Monday-Friday" and "Saturday-Sunday". There are three
time ranges for both periods.
10.3.3.3. Load Menu
This menu enables you to load pellets manually. This can be done only when the boiler is in OFF mode.
Load Menu
This menu allows you to load pellets manually when the boiler is started for the first time.
To perform this operation, it is necessary that the system enters the OFF mode.
Time and Date Menu
This menu allows you to set the exact time and date.
By pressing the P4 and P6 keys, the hours, minutes, years, months and days are set.
By pressing the P3 key you enter the change mode, and by pressing the P4 and P6 keys you change the value.
If you press the P3 key, you will save the changes and you exit the menu by pressing the P1 key.
Remote Control Menu
This menu allows you to activate or deactivate the remote control - Remote Control SYTX. Remote control is not factory set
Language Selection Menu
This menu allows you to change the language on the LCD display.
Display Menu (Keyboard Menu)
It contains two submenus:
Menu
Description
Set Contrast
Men for adjusting the contrast of LCD display
Set Minimum Light
Menu for adjusting the brightness of the LCD display
10.3.8.1. Set Contrast
By pressing the P4 and P6 keys you increases or decreases contrast.
By pressing the P3 key the changes are saved and you exit the menu.
By pressing the P1 key you exit the menu without saving the changes.
10.3.8.2. Set Minimum Light
