User’s Manual
Tube-U4G
4G/3G
Start Using Tube-U4G
Make sure Tube-U4G is inside a network coverage
area. On your computer’s desktop, double-click
the icon to launch the Tube-U4G connec�on
program.
Tube-U4G Program Home Page
Install Tube-U4G U�lity Program
Tube-U4G contains the necessary drivers for
Windows 7/8/10 pla�orm; an installa�on CD is not
required. The first �me connec�ng Tube-U4G to
a Windows computer, Tube-U4G u�lity program
will start u�lity program installa�on automa�
-
cally. Please permit the program installa�on if
there is prompt window during the installa�on.
Follow the onscreen instruc�ons to complete
the setup of the Tube-U4G u�lity program.
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
If the installa�on does not start automa�cally,
please turn on the CD Auto Run feature in your
computer or manually browse the new CD-ROM
drive added by Tube-U4G in "
My Computer
",
the setup.exe file of Tube-U4G program can be
found in the CD-ROM drive.
Manual installa�on: Double-click the "
Setup.exe
"
file and follow the on-screen instruc�ons to
complete the Installa�on.
(Please permit the
program installa�on if there is any prompt
message during the installa�on process.)
A�er installa�on is completed, a shortcut to the
Tube-U4G program will appear on your computer
desktop.
●
●
<
NOTE
>
If the computer does not have Tube-U4G drivers
installed, Tube-U4G will prepare the u�lity program
installa�on.
If the u�lity program is already installed, Tube-U4G
will be detected, and u�lity program will be up, and
running for you.
<
NOTE
>
When using Tube-U4G with a PIN-enabled SIM card,
each �me at program launch, it will be required to
input proper PIN code to use Tube-U4G . If the
PIN-code is incorrectly input three �mes, SIM will
be locked. To unlock a locked SIM card, a PUK
code is required. The PUK code can be obtained
from the service provider. (When asking for PUK
code, please contact your service provider to
verify you are the owner of the SIM card.)
<
NOTE
>
Insert SIM Card Before Using Tube-U4G
Remove the cover on the back of Tube-U4G
Insert SIM card as shown in the diagram below.
Please make sure the rear cap securely �ghtened
before connec�ng to computer.
<
NOTE
>
Install Tube-U4G to your computer
Tube-U4G is powered by USB host port, and
designed to work with USB 2.0 / 3.0 port on your
computer. To start using Tube-U4G , please find
the USB cable in product package; connect
Tube-U4G with mini-USB connector, and plug
the USB type A connectors into an available USB
port on your computer.
Moun�ng Tube-U4G
There are various ways to mount Tube-U4G onto
a suitable loca�on.
Tube-U4G can be mounted on:
a
Boat, or yacht
TSM1 + TSM-B1 applica�on scenario
Tube-U4G can be installed with TSM1+TSMB1
combina�on to provide moun�ng op�ons on
slanted or level surfaces, as well as various
adjustments of antenna angle for be�er signal
recep�on.
c
Fence, wall or roof installa�on
Via intui�ve moun�ng ear design, Tube-U4G can
be strapped via plas�c strap in product package.
This gives great flexibility to install Tube-U4G on
the pole, the fence, or fixed on the wall.
TSM1, TSM-B1 are sold seperately.
<
NOTE
>
b
RV or school bus
TSM1 + TSM-B1 applica�on scenario
Combining Tube-U4G with TSM1+TSMB1, this
combina�on provides moun�ng op�ons on the
border, roof, or rear end of vehicle, as well as
various adjustments of antenna angle for be�er
signal recep�on.
TSM1, TSM-B1 are sold seperately.
<
NOTE
>
