5 Maintenance
Study the instructions carefully.
The items refer to the parts list and service kits section.
Lubricate the rubber seals before fitting them.
5.5
Assembly of actuator
Step 1
1. Fit O-ring (9) on piston (10).
2. Fit the piston/spring package.
2603-0011
Step 2
1. Fit O-rings (3, 11) in bonnet (13) and O-ring (3) on cylinder (1).
2. Fit the cylinder.
2603-0013
Step 3
1. Fit lock wire (12) through the slot in cylinder (1) into the hole
in bonnet (13).
2. Rotate the cylinder 360
o
(see step 4).
Rotate by hand or with
filter strap!
2603-0014
Step 4
NOTE!
It is recommended to rotate cylinder (1) further 180
o
in relation to
bonnet (13) so that the top and bottom air connections are fixed
on the same side.
2603-0015
20
