Alfa Laval TE67P Series, Instruction Manual

Page: 1 / 6

2. Product identification
The device can be identified by its manufacturing label. It
provides the most important data. By the ordering code the
product can be clearly identified.
Fig. 1 manufacturing label, example
The manufacturing label must not be removed from the
device.
3. Mechanical Installation
3.1 Mounting and safety instructions
* WARNING! Install the device only when depressurized.
* WARNING! This device may only be installed by qualified
technical personnel who has read and understood the
instruction manual!
Handle this high-sensitive precision measuring device with
care, both in packed and unpacked condition!
There are no modification/changes to be made on the device.
Do not throw the package/device!
To avoid damaging the instrument, remove packaging and
protective cap directly before starting assembly. The delivered
protective cap has to be stored!
Place the protective cap on the pressure post again
immediately after disassembling.
Do not use any force when installing the device to prevent
damage of the device and the plant!
3.2 General installation steps
Carefully remove the pressure measuring device from the
package and dispose of the package properly.
4. Initial start-up
* WARNING! Before start-up, the user has to check for
proper installation and for any visible defects.
* WARNING! The device can be started and operated by
authorized personnel only, who have read and understood
the instruction manual.
* WARNING! The device has to be used within the technical
specifications only! (Compare the data in the data sheet)
5. Placing out of service
* WARNING! Disassemble the device only in pressure
less condition!
* WARNING! Depending on the medium, it may cause
danger for the user. Comply therefore with adequate
precautions for purification.
6. Maintenance
In principle, this device is maintenance-free. If desired, the
housing of the device can be cleaned usuíng a damp cloth
and non-aggressive cleaning solutions.
Instruction Manual
Alfa Laval Marine Pressure Gauge
TE67Pxxxxxxxxx
1. General information
1.1 Information on the Instruction manual
This Instruction manual contains important information on
proper usage of the device. Read this instruction manual
carefully before installing and starting up the pressure
measuring device.
Adhere to the safety notes and operating instructions which
are given in the instruction manual. Additionally applicable
regulations regarding occupational safety, accident prevention
as well as national installation standards and engineering
rules must be complied with!
This instruction manual is part of the device, must be kept
nearest its location, always accessible to all employees.
This instruction manual is copyrighted. The contents of this
instruction manual reflect the version available at the time of
printing. It has been issued to our best knowledge. However,
errors may have occurred. Alfa Laval Kolding A/S is not liable
for any incorrect statements and their effects.
- Technical modifications reserved –
1.2 Target group
WARNING! To avoid operator hazards and damages of the
device, the following instructions have to be worked out by
qualified technical personnel.
1.3 Limitation of liability
By non-observance of the instruction manual, inappropriate
use, modification or damage, no liability is assumed and
warranty claims will be excluded.
1.4 Intended use
The Alva Laval Pressure Gauges TE67Pxxxxxxxxx have,
according to the type, been developed for applications in
overpressure and vacuum measurement. It is the operator’s
responsibility to check and verify the suitability of the device
for the intended application. If any doubts remain, please
contact our local Alfa Laval Company in order to ensure
proper usage. Alfa Laval Kolding A/S is not liable for any
incorrect selections and their effects.
Permissible media are gases or liquids, specified in the data
sheet. In addition it has to be ensured, that this medium is
compatible with the media wetted parts.
- The technical data listed in the current data sheet are en-
gaging and must be complied with. If the data sheet is not
available, please order or download it from our homepage
(http://www.alfalaval.com)
* WARNING! Danger through improper usage
1.5 Package contents
Please verify that all listed parts are undamaged included in
the delivery and check for consistency specified in our order:
- pressure gauge
- mounting instructions
Page 1 IM-TE91K032-EN
4
Original Manual