[email protected]
Movil:959440045
73
5.9
Vibration
5.9.1
Vibration analysis
A separator normally vibrates and produces a
different sound when passing through its critical
speeds during run-up and run-down.
It also vibrates and sounds to some extent when
running. It is good practice to be acquainted with
these normal conditions.
Excessive vibrations and noise indicate that
something is wrong. Stop the separator and
identify the cause.
Use vibration analysis equipment to periodically
check and record the level of vibration.
The level of vibration of the separator should not
exceed 9 mm/s.
DANGER
Disintegration hazards
When excessive vibration occurs, keep bowl
filled and stop separator.
The cause of the vibration must be identified
and corrected before the separator is
restarted. Excessive vibration can be due to
incorrect assembly or poor cleaning of the
bowl.
G
0
07
522
1
Measuring points for vibration analysis
www.fdm.com.pe
Summary of Contents for MMPX 303SGP-11
