[email protected]
Movil:959440045
37
4 Operating Instructions
4.1 Operating routine
4.1.5
Starting and running-up
procedure
1.
Open the water supply valve(s). Make sure
that the water supply is on 150-600 kPa (1,5-
6 bar).
2.
Start the separator.
3.
Be alert for unusual noises and conditions.
4.
Note the normal occurrence of critical speed
periods. Some vibrations occur for short
periods during the starting cycle, when the
separator passes through its critical speeds.
This is normal and passes over without
danger. Try to learn the vibration
characteristics of the critical speed pattern.
DANGER
Disintegration hazards
When excessive vibration occurs, keep bowl
filled and stop separator.
The cause of the vibration must be identified
and rectified before the separator is
restarted.
Excessive vibration may be due to incorrect
assembly or insufficient cleaning of the bowl.
0
1
2
3
4
5
6
7
8
9
10
S
0
00
91
2
1
Water supply
www.fdm.com.pe
Summary of Contents for MMPX 303SGP-11
