Aleratec 350135 Page 2 User Manual Download

Page: 2 / 64

www.aleratec.com

Copyright/Model Identification

The content of this manual is for informational purposes only and is subject to

change without notice.

and the software described within may not be copied, except in the normal use of the

product(s) described within or to make a backup copy.

Aleratec, Inc.

9851 Owensmouth Avenue

Chatsworth, CA 91311 U.S.A.

Aleratec

is a registered trademark and 1:5 HDD Copy Cruiser High-Speed WL™

and 1:11 HDD Copy Cruiser High-Speed WL™ are trademarks of Aleratec, Inc.

Check out Aleratec Online!

•  google.com/+AleratecInc
•  YouTube.com/Aleratec
•  Twitter.com/Aleratec
•  Facebook.com/Aleratec
•  Blog.Aleratec.com

Please record the following information to help expedite any warranty claim:

Model No. _________________________ Serial No.________________________

Date Purchased _______________________________________________________

Place of Purchase _____________________________________________________

NOTE: Please store and track the included software, registration codes and

parts carefully. Requests for replacement software, registration codes, and/or

parts may incur a fee.

Summary of Contents for 350135

































































Search results

Summary of Contents for 350135

Reviews:

Related manuals for 350135

Brands by name

Popular brands

Aleratec 350135, User Manual

Search results

Summary of Contents for 350135

Reviews:

Related manuals for 350135

Brands by name

Popular brands