Service Guide
7835-SDTR1
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
www.alemite.com
Copyright
©
2000 by Alemite Corporation
This document contains confidential information that is the property of Alemite Corporation
670653
and is not to be copied, used, or disclosed to others without express written permission.
Figure 1 Pump Model 7835-SDTR1
Description
NOTE: The components within the fluid-wetted path of
this pump are stainless steel and Teflon.
CAUTION
This pump is tested in mineral oil. Flush the pump thor-
oughly with a solvent compatible with the product dis-
pensed as required.
The major components of pump model 7835-SDTR1 consist of a
reciprocating air motor and a double-acting pump tube. The pump
tube is divorced from the motor which:
• protects the motor from product contamination
• allows separation without product leakage
The pump tube is designed to enable the delivery of a variety of
materials. This medium-pressure (5:1) pump includes a bung adapter
[2 " NPTF (m)] that allows operation directly from original 55-gallon
(200/205 l) drums
Specifications
Air Motor
Pump Tube
Piston
Diameter x Stroke
Air Inlet
Maximum
Air Pressure
In
Cm
psi
Bars
3 x 1-5/8
7.6 x 4.1
1/4 " NPSI (f)
200
13.8
For details on the air motor, refer to Service Guide SER 338905
See Figure 2 for performance curves.
Material
Outlet
Max.
Material
Pressure
Max. Free-Flow
Delivery/Minute *
Recommended
Continuous
Delivery/Minute
Displacement
per Cycle
psi
Bars
Gallons
Liters
Gallons Liters
In
3
Cm
3
3/4 " NPTF (f) 1000
69
4.5
17
2.75
10.4
3.6
59
See Figure 2 for performance curves.
* SAE 10 oil at 75 ° F (24 ° C) and 100 psi [6.9 Bars] air pressure.
Table 1 Pump Model 7835-SDTR1 Specifications
Medium-Pressure Stainless Pump
SER 7835-SDTR1
Revision 8-00
1-800-548-1191-http://[email protected]