Design • Print • Trace
07/07/2011
Due to the risk of vibration, it is not recommended to fix the printer directly onto
the conveyor.
Install the controller and connect it to the print-head using the supplied data cable but
do not power on.
When the final position of the print-head along the conveyor is determined, the next
step is to “ink up” the TC print-head, as it is shipped dry (see next chapter).
2.1.3 Photocell installation
Install the supplied photocell close to, but before the print-head. This will detect the
product just before it passes the print-head nozzles (Fig. 11)
TC series print-heads Operator Manual
5
Fig. 9: S062 Square
Fig. 10: Print-head mounting