clicking sound and the burner should ignite. Check whether the burner is lit. If
the burner is not lit, repeat this process.
If the burner is still not lit after two attempts, turn off the gas tap and wait 5
minutes before repeating the ignition sequence.
The control knobs light up when they are in operation.
6. Once the burner is lit, the flame height can be adjusted by pushing the knob in
and turning it counter-clockwise to any position between the maximum and
minimum position.
7. Ignite the remaining burners one after the other from left to right.
Manual ignition
If necessary this barbecue can be lit manually.
Igniting the burners manually
1. Open the lid of the gas barbecue and leave it open while igniting.
2. Light a 90-mm match and hold it over the burner at the left end of the grill.
3. To ignite the burner, push in the associated control knob, then turn it 90°
counter-clockwise while it is pushed in (maximum position). The control knobs
light up when they are in operation.
The burner is lit by the match.
4. As soon as the left burner has been lit, the next burner along can be turned on
and lit.
5. Ignite the remaining burners from left to right through the cross-ignition
channel.
6. Once the burner is lit, the flame height can be adjusted by pushing the knob in
and turning it counter-clockwise to any position between the maximum and
minimum position.
Taking the grill out of operation
1. Close the valve on the gas canister by turning it clockwise.
2. Push all control knobs and turn them to the "OFF" position. The control knobs are
no longer lit up.
3. Let the grill cool down completely.
4. Clean the grill.
5. Close the lid of the gas grill.
Use
35