Alcatel SPEED TOUCH 710, User Manual

Page: 85 / 254

Access methods for PPP
PPP & IP Routing
configuration
10 Configuration and Use - PPP & IP Routing
85 / 254
3EC 17605 AAAA TCZZA Ed. 02
10.2 Using PPP & IP Routing
Three methods exist to open a PPP & IP Routing session:
Dialin
The session is opened manually.
Alwayson
After the AST710 is powered and finished its POST
successfully, the AST710 automatically tries to open the PPP
session.
Dialondemand
The session is opened automatically, triggered by the arrival
or departure of packets at an AST710 Ethernet port, destined
for a PPP connection.
Per default, following PPP & IP Routing connections are
preconfigured:
PPP1 : dialin connection
PPP2 : alwayson connection
DHCP_SPOOF : spoofing connection.
In case these entries do not meet your requirements, you can
configure a new one as follows:
1. If needed, add a PPP phonebook entry with the correct
VPI/VCI on the ' Phonebook ' page.
2. On the ' PPP ' page, select this phonebook entry from the
' Name ' popdown list.
3. For this entry, select the correct encapsulation method from
' Encap ' popdown list. the
4. Click .
5. Optionally, perform detailed configurations.
See section 10.3 for more information.