Standards Compliance
Regulatory Compliance and Safety Information
page A-2
OmniSwitch 7700/7800 Hardware Users Guide
April 2005
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC
standards:
Safety Standards
•
UL 60950
•
CAN/CSA-C22.2 No. 60950-00
•
EN 60950
•
IEC 60950
•
TS 001
•
AS/NZS 3260
•
CB Certification PBR IEC 950
EMC Standards
•
FCC Part 15 (CFR 47) Class A/Class B
•
ICES-003 Class A/Class B
•
EN 55022 Class A/Class B
•
CISPR 22 Class A/Class B
•
AS/NZS 3548 Class A/Class B
•
VCCI Class A/Class B
•
EN 55024
•
EN 50082-1
•
EN 61000-3-2
•
EN 61000-3-3
•
EN 61000-4-2
•
EN 61000-4-3
•
EN 61000-4-4
•
EN 61000-4-5
•
EN 61000-4-6
•
EN 61000-4-8
•
ENC 1000-4-11
Safety and Environmental Standards
•
ETS 300 019 Storage Class 1.1
•
ETS 300 019 Transportation Class 2.3
•
ETS 300 019 Stationary Use Class 3.1
All hardware switching modules used in an OmniSwitch 7700/7800 comply with Class A and Class B
standards for digital devices per the FCC Part 15, ICES-003, EN 55022, CISPR 22, AS/NZS 3548, and
VCCI standards. Modules with copper connectors meet Class A requirements using unshielded (UTP)
cables, but meet Class B requirements using shielded (STP) cables.
