Network Interface (NI) Modules
GNI Modules
OmniSwitch 7700/7800 Hardware Users Guide
April 2005
page 5-19
OS7-GNI-C12/OS7-GNI2-C12 Front Panel
OS7-GNI-C12 Front Panel
OS7-GNI-C12
OK1
OK2
1
2
3
4
5
6
7
8
9
10
11
12
Module Status LEDs
OK1.
Hardware Status. Displays solid
green when powered on and the GNI
has passed hardware diagnostic tests.
Displays solid amber when powered on
and the GNI has failed hardware diag-
nostic tests.
OK2.
Software Status. Blinks green
when the GNI is operational and has
successfully loaded software. Displays
solid amber when powered on and the
GNI has failed to load software.
Ethernet Port LEDs
Each Gigabit Ethernet port has two
built-in corresponding LEDs. The top
LED indicates 10/100 Mbps link and
activity status for the port while the bot-
tom LED indicates 1 Gigabit link and
activity status for the port. The appro-
priate LED displays green when a valid
Ethernet cable connection exists.
Flashes green as data is transmitted or
received on the port.
Ethernet Ports
The OS7-GNI-C12 module provides 12
10/100/1000 Ethernet ports. These
ports are twisted-pair and are individu-
ally configurable as 10BaseT,
100BaseTX, or 1000BaseT. The ports
use RJ-45 connectors.
Refer to the Technical Specifications
table on
for more informa-
tion.
Module
Status
LEDs
Module
Status
LEDs
Module Label
The label on the front panel identifies
the module type: either OS7-GNI-C12
or OS7-GNI2-C12.
