Chassis Management Module (CMM)
Chassis-Based MAC Address
OmniSwitch 7700/7800 Hardware Users Guide
April 2005
page 4-17
Chassis-Based MAC Address
The switch’s base MAC address is not tied to the CMM module. Instead, the switch provides an EEPROM
card near the chassis backplane that stores the MAC address. This allows the switch to retain the MAC
address when a CMM module is removed or replaced. For detailed information on MAC address manage-
ment on the switch, refer to the “Managing MAC Addresses and Ranges” chapter in the
Switch Manage-
ment Guide
.
MAC EEPROM Redundancy.
A second EEPROM is provided for redundancy. An EEPROM card can
be removed and replaced in the field by an authorized Alcatel Support Engineer in the unlikely event of an
EEPROM failure.
File Management Commands
cd
pwd
mkdir
rmdir
ls
dir
rename
rm
delete
cp
mv
move
chmod
attrib
fsck
newfs
ed
vi
view
tty
show tty
rz
more
install
Switch Logging and Monitoring Commands
swlog
swlog appid level
swlog output
show log swlog
show swlog
debug ktrace
debug ktrace appid level
debug ktrace show
debug systrace
debug systrace appid level
debug systrace show
debug systrace show log
debug memory monitor
debug memory monitor show log
Memory Monitoring Commands
show log pmd
Session Management Commands
session timeout
