Compact Flash Configuration
The Model OmniAccess 601 supports compact flash memory. For a list of supported flash sizes
and vendors supported, refer to the release notes that shipped with the Model OmniAccess 601
router.
To configure and use compact flash memory, the following file commands are supported in
TiOS 8.1 or later:
Saving Configurations
Use the following command to save new configurations to system memory.
NOTE:
Before powering down the router, execute a
write memory
command to save the router
configuration.
Router>
write memory
Use the following command to save new configurations to a network host for archiving and
back-up purposes. Identify the host name or IP address, the host directory the file is being
transferred to, and the new name as follows.
Router>
write network 10.1.100.149 /maindir/config01.txt
NOTE:
When saving to a network host, the host directory and file name must already exist.
Table 15: Compact Flash File Commands
Command Name
Description
compare_boot
Compare bootrom files between flash and bootrom images
copy
Copy the file from flash to flash
copy_boot
Copy the bootrom image to flash bootrom image area
download
Download a file from the network to main flash
format
Format the flash
invalidate_boot
Invalidate the Flash Bootrom Image
ls
List the file names on the flash
rename
Rename a file on the flash
rm
Remove a file from the flash
show_boot
Display Flash Bootrom Data
upload
Upload a file to host
version
List versions of the image files from the flash
