9
Installation Guide: 601, 602, and 604 Routers
DUP
Indicates the type of
duplex mode
Off = Half duplex
Green = Full duplex
Power
Indicates system power
status
Green = power on
Off = power off
Compact Flash
Port for compact flash
module
—
Table 5 OmniAccess 601 Back-Panel Ports
Connector
Description
WAN 1
WAN connection port. This port accepts cables with RJ-48C connectors.
Backup WAN
An ISDN backup option is supported in releases 8.3 and higher. This option
provides a backup if the primary network connection is lost. This port
accepts cables with RJ-45 connectors.
FE 0 / 1
Ethernet LAN connection ports. These ports accept cables with RJ-45
cable connectors.
AUX
Reverse telnet connection. This port accepts a cable with an RJ-45 cable
connector.
Console
Console management port. This port accepts a cable with an RJ-45 cable
connector.
DC power
12 VDC power connection. This port accepts the 2 mm. power connector
on the DC power supply cable that ships with the OmniAccess 602 router.
Table 4 LED and Port Descriptions (continued)
Port
Description
Color
