Alcatel AST570, User Manual

Page: 248 / 300

Introduction
Procedure
20 Maintenance - Speed Touch ToDefaults
248 / 300
3EC 17766 AAAA TCZZA Ed. 04
20.2.3 SwitchtoDefaults
At the back of the AST570 there is a small push button labeled
'Defaults' .
Via this button a hardware reset of the AST570 , the
SwitchtoDefaults , is possible.
Proceed as follows:
1. Make sure your AST570 is turned on.
2. Use a pencil to press the push button at the back of the
AST570 . Hold on the push button for several seconds until all
front LEDs go out.
3. Release the button. Via the flashing front panel LEDs, you will
notice that the AST570 will restart.
4. The AST570 will come online with manufacturing defaults.
5. For a nonwired network, reauthenticate your WLAN client
adapter.
6. If needed, reconfigure the AST570 IP address, e.g. via a
PingofLife

and its Wireless LAN settings.