Alcatel Alcatel OmniAccess 4324, Installation Manual

Page: 4 / 44

OmniAccess 4324: Installation Guide
iv Part 031640-00 May 2005
Warning—This is a Class A product. In a domestic environment, this product
may cause radio interference in which case the user may be required to take
adequate measures.
EU - Class A
This product complies with EN55022 Class A and EN55024 standards.
Safety
Lithium Battery Notice
This product contains a lithium battery which is replaceable only by a trained
technician.
Laser Notice
This product uses replaceable laser transceiver modules on some ports.
This product complies with 21 CFR Chapter 1, Subchapter J, Part 1040.10, and
IEC 60825-1: 1993, A1: 1997, A2: 2001, IEC 60825-2: 2000.
For continued compliance with the above laser safety standards, only
approved Class 1 modules from our approved vendors should be installed in
the product. See
“Approved GBICs” on page 23 for a list of approved modules
and vendors.
C
AUTION
— The lithium battery may explode if it is incorrectly replaced. A trained
technician should replace the battery with only the same or equivalent type
battery recommended by the manufacturer. Dispose of used batteries according
to the manufacturer’s instructions.
C
AUTION
— Use of controls or adjustments of performance or procedures other
than those specified in this manual may result in hazardous radiation exposure.
CLASS 1
LASER PRODUCT