Alcatel Alcatel OmniAccess 4324, Installation Manual

Page: 27 / 44

Verifying the Installation 13
C
HAPTER
3
Verifying the Installation
Once the Alcatel Wireless LAN Switch is physically installed, run
the following power-on test:
Check for the proper power indicators.
Immediately upon power up, you should observe the following:
z
The system Power LED lights solid green
z
The system Status LED is initially off while booting
Check the fans to verify they are working.
You should be able to feel significant airflow blowing from the
chassis vents at each of the three fan positions.
Check for the appropriate operation indicators.
Once the system has successfully booted, you should observe
the following:
z
The system Power LED is still lit solid green.
z
The system Status LED is solid green.
N
OTE
— For more information on LED behavior, see System Indica-
tor LEDs on page 2 .
1
2
C
AUTION
— If one or more fans do not work, immediately shut down
and replace the Alcatel Wireless LAN Switch.
3