Alcatel-Lucent OmniTouch 8 Series, Phone Manual, Page: 58 / 64

Procedure:
In the case of the transaction code:
1. Enter a number from 1 to 15 digits.
2. To validate the code, press the "Apply" softkey.
In the case of the business code:
1. Enter a number from 1 to 3 digits.
2. To validate the code, press the "Apply" softkey.
Results: If the code is entered before a time-out, the code is registered:
___change-begin___
___change-end___
At the end of the procedure, the agent set changes to "Wrap-Up", "Pause" or "Idle" state.
6.2 Automatic Wrap-Up
Role: At the end of a communication or following the "Transaction code" phase, the set returns
to the automatic "Wrap-Up" state.
This phase is used to carry out non telephone operation. During this period, your set is not
available to receive any type of call.
___change-begin___
___change-end___
Procedure: To exit from the "Wrap-Up" phase, press the "WrapUp" softkey or wait for the
Chapter
6
( & ''
6-2