Alcatel-Lucent OmniTouch 8 Series, Phone Manual, Page: 57 / 64

6.1 Transaction Code Phase
Role: This function is used at the end of a conversation, to enter parameters that can be used
for statistics.
If managed and depending on the system management, a transaction code or a business
code, used to identify the call, are asked at the end of a call.
The following screens are displayed:
___change-begin___
___change-end___
or
___change-begin___
___change-end___
Softkeys Use this function to:
Rubout correct the last number of the code
Delete delete all the code
Apply validate the code
Cancel cancel the procedure
6-1