Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 99 / 2018

Chassis Management and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 2-47
show power
Displays the hardware information and current status for chassis power supplies.
show power [supply] [number]
Syntax Definitions
supply Optional command syntax.
number The single-digit number for a specific power supply installed in the
chassis. If no power supply number is specified, information for all
power supplies is displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When the show power command is entered on stackable switches, information is displayed only for
power supplies that are installed in the chassis and powered on . If a power supply is present in a power
supply bay, but the power supply is unplugged or its on/off switch is in the off position, the power supply
is not listed in the command output.
Examples
-> show power
Slot PS Wattage Type Status Location
----+----+---------+------+-----------+----------
1 600 AC UP Internal
2 600 AC UP Internal
3 -- -- -- --
4 600 IP UP External
5 600 IP UP External
6 600 IP UP External
7 600 IP UP External
-> show power 5
Module in slot PS-5
(Power Shelf slot 5)
Model Name: OS-IPS-600A,
Description: ILPS AC,
Part Number: 902252-10,
Hardware Revision: A01,
Serial Number: E51P4078,
Manufacture Date: JAN 07 2005,
Operational Status: UP,
Power Provision: 600