Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 904 / 2018

VLAN Stacking Commands
page 24-42 OmniSwitch CLI Reference Guide November 2009
show ethernet-service uni
Displays a list of UNI ports configured for the switch and the profile association for each port.
show ethernet-services uni [slot/port | linkagg agg_num]
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
agg_num The link aggregate ID number (0–31).
Defaults
By default, profile information for all UNI ports is displayed if a slot/port or link aggregate ID number is
not specified.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
Specify a slot/port or link aggregate ID number to display information for a single slot/port or link aggre-
gate ID.
Examples
-> show ethernet-service uni
Port UNI Profile
+--------+--------------------+
1/1 uni-profile-default
1/2 multi-site
1/3 multi-site
- show ethernet-service uni 1/3
Port UNI Profile
+--------+--------------------+
1/3 multi-site
Release History
Release 6.6.1; command was introduced.
output definitions
Port The slot/port number or link aggregate ID for the UNI port.
UNI Profile The UNI profile associated with the port.