Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 894 / 2018

VLAN Stacking Commands
page 24-32 OmniSwitch CLI Reference Guide November 2009
show ethernet-service
Displays configuration information for VLAN Stacking Ethernet services.
show ethernet-service [service-name service-name | svlan svid]
Syntax Definitions
service-name The name of an existing VLAN Stacking service. Use quotes around
string if the service name contains multiple words with spaces between
them (e.g., “Alcatel-Lucent Engineering”).
svid The VLAN ID number that identifies an existing SVLAN (2–4094).
Defaults
By default, all services are displayed if a service name or SVLAN ID is not specified with this command.
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Enter the name of a service to display configuration information for a specific service.
•
Enter an SVLAN ID to display configuration information for all services that are associated with a
specific SVLAN.
Examples
-> show ethernet-service
Service Name : VideoOne
SVLAN : 300
NNI(s) : 2/1, 3/2
SAP Id : 20
UNIs : 1/1, 1/2
CVLAN(s) : 10, 20
sap-profile : sap-video1
SAP Id : 30
UNIs : 1/3
CVLAN(s) : untagged, 40
sap-profile : sap-video2
Service Name : CustomerABC
SVLAN : 255
NNI(s) : 1/22
SAP Id : 10
UNIs : 2/10, 2/11
CVLAN(s) : 500, 600
sap-profile : default-sap-profile