Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 749 / 2018

Ethernet Port Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 20-77
show interfaces hybrid capability
Displays default auto negotiation, speed, duplex, flow, and cross-over settings for a single combo port, a
range of combo ports, or all combo ports on a switch.
show interfaces [slot[/port[-port2]]] hybrid {fiber |copper} capability
Syntax Definitions
slot Slot number you want to display.
port Port number of the interface you want to display.
port2 Last port number in a range of ports you want to display.
fiber Specifies that the configuration of the SFP port(s) will be displayed.
copper Specifies that the configuration of the copper RJ-45 port(s) will be
displayed.
Defaults
If a specific slot or slot/port number is not entered with this command, the information for all switch
combo ports is displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Enter a slot and port number or a range of port numbers to display information for a specific combo
port or a range of combo ports.
•
Enter a slot number to display information for all combo ports on a specific slot.
•
The show interfaces hybrid capability command displays defaults settings in two rows of data for
each combo port. The first row of data, identified by the label CAP , displays the valid user-defined
configuration settings available for the combo port. The second row, identified by the label DEF ,
displays the default settings for the combo port.
Examples
-> show interfaces 1/25 hybrid copper capability
Slot/Port AutoNeg Flow Crossover Speed Duplex
-----------+---------+--------+-----------+----------+----------
1/25 CAP EN/DIS EN/DIS MDI/X/Auto 10/100/1G Full/Half
1/25 DEF EN EN Auto Auto Auto
output definitions
Slot The slot number.
Port The port number