Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 60 / 2018

Chassis Management and Monitoring Commands
page 2-8 OmniSwitch 6250 CLI Reference Guide November 2009
system time-and-date synchro
Synchronizes the time and date settings between primary and secondary CMMs.
system time-and-date synchro
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The system time-and-date synchro command applies only to switches with redundant CMM
configurations.
•
Synchronizing date and time settings is an important step in providing effective CMM failover for
switches in redundant configurations. Be sure to periodically synchronize the primary and secondary
CMMs using this command.
•
For detailed redundancy information refer to “Managing Stacks” in addition to “Managing CMM
Directory Content” in the
OmniSwitch 6250 Switch Management Guide.
Examples
-> system time-and-date synchro
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
systemServices
copy flash-synchro Copies the certified directory version of the primary CMM software to
the certified directory of the secondary CMM.