Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 359 / 2018

Link Aggregation Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 12-21
lacp agg actor admin key
Configures an actor administrative key for a port, which allows the port to join a dynamic aggregate
group.
lacp agg [ethernet | fastethernet | gigaethernet] slot/port actor admin key actor_admin_key
[actor admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect]
[[no] distribute] [[no] default] [[no] expire] | none}]
[actor system id actor_system_id]
[actor system priority actor_system_priority]
[partner admin system id partner_admin_system_id]
[partner admin key partner_admin_key]
[partner admin system priority partner_admin_system_priority]
[partner admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect]
[[no] distribute] [[no] default] [[no] expire] | none}]
[actor port priority actor_port_priority]
[partner admin port partner_admin_port]
[partner admin port priority partner_admin_port_priority]
lacp agg no [ethernet | fastethernet | gigaethernet] slot/port
Syntax Definitions
ethernet Documents that the port is 10 Mbps Ethernet.
fastethernet Documents that the port is 100 Mbps Fast Ethernet.
gigaethernet Documents that the port is Gigabit Ethernet.
slot The slot number for this aggregate.
port The port that the switch will initially use as the Spanning Tree virtual
port for this aggregate.
actor_admin_key The administrative key associated with this dynamic aggregate group.
Possible values are 0–65535.
actor admin state See the lacp agg actor admin state command on page 12-24 .
actor_system_id The MAC address of this dynamic aggregate group on the switch.
actor_system_priority The priority of the dynamic aggregate group. Possible values are
0–255.
partner_admin_system_id The MAC address of the remote switch’s dynamic aggregate group.
partner_admin_key The administrative key for the dynamic aggregation group’s remote
partner. Possible values are 0–65535.
partner_admin_system_priority The priority of the remote system to which the dynamic aggregation
group is attached. Possible values are 0–255.
partner admin state See the lacp agg partner admin state command on page 12-30 .
actor_port_priority The priority of the actor port. Possible values are 0–255.