Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 344 / 2018

Link Aggregation Commands
page 12-6 OmniSwitch 6250 CLI Reference Guide November 2009
static linkagg admin state
Configures the administrative state (whether the static aggregate group is active or inactive) of a static
aggregate group.
static linkagg agg_num admin state {enable | disable}
Syntax Definitions
agg_num The number corresponding to the static aggregate group.
enable Specifies that the static aggregate group is active and is able to aggre-
gate links.
disable Specifies that the static aggregate group is inactive and not able to
aggregate links.
Defaults
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When the administrative state is set to disable , the static aggregate group is disabled.
Examples
-> static linkagg 2 admin state disable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggAdminState
parameter default
enable | disable enable
static linkagg size Creates a static aggregate group.
show linkagg Displays information about static and dynamic (LACP) aggregate
groups.