Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 343 / 2018

Link Aggregation Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 12-5
static linkagg name
Configures a name for an existing static aggregate group.
static linkagg agg_num name name
static linkagg agg_num no name
Syntax Definitions
agg_num The number corresponding to the static aggregate group.
name The name of the static aggregation group, an alphanumeric string up to
255 characters. Spaces must be contained within quotes (e.g., “Static
Group 1”).
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of this command to remove a name from a static aggregate.
Examples
-> static linkagg 2 name accounting
-> static linkagg 2 no name
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggName
static linkagg size Creates a static aggregate group.
show linkagg Displays information about static and dynamic (LACP) aggregate
groups.