Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 313 / 2018

SNMP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 10-17
show snmp mib family
Displays SNMP MIB information. Information includes MIP ID number, MIB table name, and command
family.
show snmp mib family [table_name]
Syntax Definitions
table_name The name of the MIB table to be displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If a table name is not specified in the command syntax, all MIB table names will be displayed.
•
If the command family is not valid for the entire MIB table, the command family will be displayed on a
per-object basis.
•
Table names are case-sensitive. Therefore, use the exact table names from the MIB database.
Examples
-> show snmp mib family trapStationTable
MIP ID MIB TABLE NAME FAMILY
-------+----------------------------------------+---------------------
73733 trapStationTable snmp
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
MIP ID Identification number for the MIP associated with this MIB Table.
MIB Table Name Name of the MIB table.
Family Command family to which this MIB table belongs.
show snmp trap filter Displays the SNMP trap filter information.