Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 289 / 2018

Configuration File Manager Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 9-9
configuration syntax check
Performs a syntax and authorization check of all CLI commands contained in a configuration file.
configuration syntax check path/filename [verbose]
Syntax Definitions
path/filename The configuration file being checked for syntax and authorization
errors. If a configuration file is located in another directory, be sure to
specify the full path. For example,
/flash/working/asc.1.snap .
verbose When verbose is specified in the command line, all syntax contained in
the configuration file is printed to the console, even if no error is
detected. When
verbose is not specified in the command line, cursory
information (number of errors and error log file name) will be printed to
the console
only if a syntax or configuration error is detected .
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
When an error is detected, an error file ( .err ) is automatically generated by the switch. By default, this
file is placed in the root /flash directory. To view the contents of a generated error file, use the view
command. For example, view asc.1.snap.1.err .
•
The syntax, mac alloc , is automatically included in many snapshot files (e.g., configuration snapshot
all ). All mac alloc -related syntax is valid during switch boot up only (i.e., it cannot be applied while
the switch is in run-time operation). Because snapshot files are commonly used as configuration files,
syntax checks may detect
mac alloc syntax and issue an error (along with a generated .err file). This is
a valid switch function and does not represent a significant problem. If a mac alloc -related error is the
only error detected, simply remove the syntax using a text editor, then re-check the file using the
configuration syntax check command.
•
It is recommended that you check all configuration files for syntax errors before applying them to your
switch.
Examples
-> configuration syntax check vlan_file1
..
Note. When the configuration syntax check command is entered, one or more dots “ . ” is displayed in the
command output. This indicates command progress; each dot represents 256 text lines in the configura-
tion file processed by the syntax check mechanism.