Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 278 / 2018

Web Management Commands
page 8-8 OmniSwitch 6250 CLI Reference Guide November 2009
show http
Displays web management configuration information.
show [ip] http
Syntax Definitions
ip Optional syntax. Using this optional syntax is the same as using the
show http command.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show http
Web Management = on
Force SSL = on
Web Management Http Port = 80
Web Management Https Port = 443
Release History
Release 6.6.1; command was introduced.
output definitions
Web Management Indicates whether web management is enabled (on) or disabled (off) on
the switch.
Force SSL Indicates whether Force SSL is enabled (on) or disabled (off) on the
switch. If this is set to
on this means that SSL is forced on an HTTP
session and hence HTTPS protocol is negotiated between the client and
server. For example, an “http://switchname.com” URL will be redi-
rected to an “https://switchname.com” URL.
Web Management Http Port The port configured for the HTTP connection.
Web Management Https Port The port configured for a secure HTTP connection (SSL enabled).