Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 211 / 2018

Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-51
show command-log status
Shows the current status of the command logging function (i.e., enabled or disabled). For more informa-
tion on enabling and disabling command logging, refer to the
command-log command on page 6-24 .
show command-log status
Syntax Definitions
N/A
Defaults
Command logging is disabled by default.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show command-log status
CLI command logging : Enable
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
sessionCliCommandLogStatus
output definitions
CLI command logging The current status of command logging on the switch. Options include
Disable and Enable . Disable indicates that the command logging func-
tion is currently disabled (default). Enable indicates that the command
logging function has been enabled via the
command-log command.
For more information, refer to page 6-24 .
command-log Enables or disables command logging on the switch.
show ssh config Displays the contents of the command.log file.