Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1924 / 2018

AAA Commands
page 43-84 OmniSwitch 6250 CLI Reference Guide November 2009
show aaa priv hexa
Displays hexadecimal values for command domains/families. Useful for determining how to express
command families in hexadecimal; hexadecimal values are used in configuring user privileges in attributes
on an external LDAP or RADIUS authentication server.
show aaa priv hexa [domain or family]
Syntax Definitions
domain or family The CLI command domain or particular command family for which you
want to display hexadecimal values. See table in Usage Guidelines.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Valid values for the family parameter are listed in the Corresponding Families column of the following
table:
•
Note that some command families may not be supported depending on the hardware platform you are
running.
•
If you do not specify a command family, hexadecimal values for all commands sets will display.
Domain Corresponding Families
domain-admin file telnet dshell debug
domain-system system aip snmp rmon webmgt config
domain-physical chassis module interface pmm health
domain-network ip rip ip-routing ipmr ipms
domain-layer2 vlan bridge stp 802.1q linkagg ip-helper
domain-service dns
domain-security session aaa