Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1710 / 2018

Policy Server Commands
page 40-8 OmniSwitch 6250 CLI Reference Guide November 2009
show policy server long
Displays more detailed information about an LDAP policy server.
show policy server long
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command displays detailed information about policy servers. Use the show policy server command
to display basic information about policy servers.
Examples
-> show policy server long
LDAP server 0
IP address : 155.132.44.98,
TCP port : 16652,
Enabled : Yes,
Operational status : Unkn,
Preference : 99,
Authentication : password,
SSL : Disabled,
login DN : cn=Directory Manager,
searchbase : ou:4.1, cn=policyRoot, o=company.fr
Last load time : 09/13/01 16:38:18
LDAP server 1
IP address : 155.132.48.27,,
TCP port : 21890,
Enabled : Yes,
Operational status : Unkn,
Preference : 50,
Authentication : password,
SSL : Disabled,
login DN : cn=Directory Manager,
searchbase : o=company.fr
Last load time : 00/00/00 00:00:00
output definitions
IP address The IP address of the policy server.
TCP port The TCP/IP port number used by the switch to connect to the policy
server.