Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 165 / 2018

Session Management Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 6-5
session banner
Sets or resets the file name of the user–defined banner. The banner is a welcome banner that appears after
the user sucessfully logs onto the switch.
session banner {cli | ftp | http} file_name
session banner no {cli | ftp | http}
Syntax Definitions
cli Creates/modifies the CLI banner file name.
ftp Creates/modifies the FTP banner file name.
http Creates/modifies the HTTP banner file name.
file_name Banner file name including the path from the switch’s /flash directory.
The maximum length of the filename and path is 255 characters.
Defaults
•
A default banner is included in one of the switch’s image files. It is automatically displayed at login so
no configuration is needed.
•
The user has the option of defining a custom supplementary banner or of using the default banner.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The session banner no command is used to disable a user defined session banner file from displaying
when you log onto the switch. The text file containing the custom banner will remain on the switch
until you remove it with the
rm command.
•
The session banner command is used to configure or modify the banner file name . You must use a
text editor to edit the file containing the banner text.
Examples
-> session banner cli/switch/banner.txt
Release History
Release 6.6.1; command was introduced.