Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1438 / 2018

QoS Commands
page 38-10 OmniSwitch CLI Reference Guide November 2009
qos log console
Sends QoS log messages to the switch logging utility, which is an event logging application available on
the OmniSwitch. The configuration of the switch logging utility determines if QoS messages are sent to a
log file in the switch’s flash file system, displayed on the switch console, or sent to a remote syslog server.
qos log console
qos no log console
Syntax Definitions
N/A
Defaults
QoS log messages are not sent to the switch logging utility by default.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
To display QoS log events as they happen on an output console attached to the switch, configure the
switch logging utility to output events to the console. This is done using the
swlog output command.
•
The entire log may be viewed at any time using the show qos log command.
Examples
-> qos log console
-> qos no log console
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSConfigTable
alaQoSConfigLogConsole
qos log lines Configures the number of lines in the QoS log.
swlog output Enables or disables switch logging output to the console, file, or data
socket (remote session).
show qos log Displays the log of QoS events.