Alcatel-Lucent OmniSwitch 6250, Cli Reference Manual, Page: 1423 / 2018

sFlow Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 37-11
show sflow receiver
Displays the sflow receiver table.
show sflow receiver [num]
Syntax Definitions
num Specifies the receiver index.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show sflow receiver
Receiver 1
Name = Golden
Address = IP_V4 198.206.181.3
UDP Port = 6343
Timeout = 65535
Packet Size= 1400
DatagramVer= 5
Release History
Release 6.6.1; command was introduced.
output definitions
Name Name of the entry to claim.
Address IP address of the sFlow collector.
UDP Port Destination port for sFlow datagrams.
Timeout Time remaining before the sampler is released and stops sampling.
Packet size Maximum number of data bytes that can be sent in a single sample dat-
agram.
Datagram ver Version of sFlow datagrams that should be sent.